2025-01-25, 09:38 PM
Ah, you must have one of the ones we put together before we started putting a little tape under the touchwheel covers. Due to tolerance differences the covers aren't always a perfect fit, and we started pre-emptively applying tape to all units about halfway through. Sorry about that!
A little thin double sided tape between the faceplate and the touchwheel cover in the "cat ear" corners is what we do (we try keep it off the touch wheel circle itself to not mess with the sensitivity). It helps to use the front half of the case to get the alignment right. The method I use is place the double sided tape in the cat ears, put the touchwheel cover inside the front half of the case, then place the faceplate in so that they're both fitted correctly, and press gently to let the adhesive make contact with the faceplate.
Hope this helps!
A little thin double sided tape between the faceplate and the touchwheel cover in the "cat ear" corners is what we do (we try keep it off the touch wheel circle itself to not mess with the sensitivity). It helps to use the front half of the case to get the alignment right. The method I use is place the double sided tape in the cat ears, put the touchwheel cover inside the front half of the case, then place the faceplate in so that they're both fitted correctly, and press gently to let the adhesive make contact with the faceplate.
Hope this helps!
