hi, would you please consider adding a setting for turning on and off the vibration under the clickwheel okthx byeee
|
icanhaz haptic on-off switch?
|
2025-01-20, 03:35 AM
We've got an issue filed already for adjusting the strength: https://codeberg.org/cool-tech-zone/tang...issues/120
We can have disabling haptics completely as a setting in the same place. 
2025-01-28, 01:01 AM
I also found the haptics to be a bit much, but after opening it up to switch around the scrollwheel cover, I noticed that it was significantly less jarring. I think that the screws were just a touch loose from the factory and that resulted in the case resonating, making it sound harsh and cheap. Try tightening the screws a bit (gently as to not break the case or strip the screws) and see if that helps in the meantime.
2025-01-29, 08:24 PM
(2025-01-28, 01:01 AM)summermusic Wrote: I also found the haptics to be a bit much, but after opening it up to switch around the scrollwheel cover, I noticed that it was significantly less jarring. I think that the screws were just a touch loose from the factory and that resulted in the case resonating, making it sound harsh and cheap. Try tightening the screws a bit (gently as to not break the case or strip the screws) and see if that helps in the meantime. yep i did that and with respect: i am looking for an off switch for any vibration. its a nerve thing. i appreciate you thinking up a workaround but its not applicable to my situation. less vibe is still vibe. |
